Barco E-2320 C, System Manual

Page: 83 / 104

Cleaning
83
Precautions
• Take care not to damage or scratch the front filter or LCD
panel. Be careful with rings or other jewelry that can touch
the front filter.
• Do not apply pressure on the front filter or LCD panel.
• Do not apply or spray liquid directly to the front filter, panel or
cabinet as excess liquid may cause damage to internal
electronics. Instead, apply the liquid to the cleaning cloth.
Proceed as follows:
• Clean the cabinet using a soft cotton cloth, lightly moistened
with a recognized cleaning product for medical equipment.
• Repeat with water only.
• Wipe dry with a dry cloth.
• The cabinet has been tested for resistance to the following
products:
• Cidex, Betadine
• Alcohol (Isopropyl and Ethyl)
• Ammonia-based cleaners (Windex)
• Aquasonic Gel
To clean the LCD panel:
• Dust particles on the LCD panel may be blown away by using a
dust remover. E.g., DUST OFF 67 (KONTAKT Chemie).
A dust remover is composed of a blend of compressed liquid
gases functioning as propellant. They provide a jet of dry inert
gas that acts like compressed air for a quick and safe removal of
dust particles and other dry contaminants on the surface of the
lcd panel or the glass panel.