Barco E-2320 C System Manual Download Page 15

Page: 15 / 104

Safety Instructions

Safety Instructions

General Recommendations

Read the safety and operating instructions before operating the
display.

Retain safety and operating instructions for future reference.

Adhere to all warnings on the display and in the operating
instructions manual.

Follow all instructions for operation and use.

Electrical shock

Type of protection (electrical):

Class I equipment

Degree of safety (flammable anesthetic mixture):

Equipment not suitable for use in the presence of a flammable
anesthetic mixture with air or with oxygen or nitrous oxide.

Power connection

• Power requirements: The display must be powered using the

12 VDC power supply that is supplied with the display.

• The 12 VDC power supply must be powered by the AC mains

voltage.

• Power cords:

Summary of Contents for E-2320 C









































































































Search results

Summary of Contents for E-2320 C

Reviews:

Related manuals for E-2320 C

Brands by name

Popular brands

Barco E-2320 C, System Manual

Search results

Summary of Contents for E-2320 C

Reviews:

Related manuals for E-2320 C

Brands by name

Popular brands