Installing drivers and software
50
• Windows Server 2003 x64 Edition.
You will need to install the B
ARCO
E-2320 C Display system drivers and
software in the following cases:
• After you have installed the display controller(s) for your
B
ARCO
Display System in your system for the first time.
• After you have reinstalled or upgraded your operating system.
1.
Start your system. When the
Found New Hardware Wizard
comes up, click
Cancel
. When the
System Settings Change
window asks you to restart your computer, click
No
.
2.
Run the
Barco Product Installation Wizard.
The Barco Product Installation Wizard should start automatically
if you insert the B
ARCO
N
IO
Display System Installation CD-ROM
into your computer’s CD/DVD drive
after
the operating system
has started. If your CD/DVD drive’s auto-run is not enabled or
the Barco Product Installation Wizard does not start
automatically, you can run the Barco Product Installation Wizard
manually by following these steps:
a)
Click the
Start
button in the task bar.
b)
Click
Run
.
c)
Click
Browse
and browse to the root directory of the
B
ARCO
N
IO
Display System Installation CD-ROM and click on
the file,
Setup.exe,
and click
Open
.
d)
Click
OK
.
or
a)
Browse to the root directory of the B
ARCO
N
IO
Display
System Installation CD-ROM and double click on the file,
Setup.exe
.
3.
Click
Next.
4.
Click
Yes
to accept the terms of the Barco and ATI license
agreements. The Barco setup wizard will continue with the
installation
only
if you accept the terms of both license
agreements. If you click
No
, the wizard will exit.
Summary of Contents for E-2320 C
