Barco E-2320 C System Manual Download Page 68

Page: 68 / 104

Display operation

• The image should contain sharp black-white transitions, like a

line pattern or characters.

• The image should contain parts that are completely black (0%

video amplitude) and parts that are full white (100% video
amplitude).

To perform Autoset:

Rotate the control wheel to display the on-screen display. The
Main Menu appears. The

Autoset

menu is selected.

Press the control wheel to enter the Autoset menu.

Rotate the control wheel to select

Full Autoset

Press the control wheel to execute the function.

Adjusting Geometry

To perform geometry adjustments:

1. Rotate the control wheel to display the on-screen display.

The Main Menu appears.

2. Rotate the control wheel to select

Adjustments

3. Press the control wheel to enter the Adjustments menu.

4. Rotate the control wheel to select

Geometry

5. Press the control wheel to enter the Geometry menu.

AUTOSET

Full Autoset
Automatic Geometry
Automatic Phase
Automatic Gain
EXIT

Summary of Contents for E-2320 C









































































































Search results

Summary of Contents for E-2320 C

Reviews:

Related manuals for E-2320 C

Brands by name

Popular brands

Barco E-2320 C, System Manual

Search results

Summary of Contents for E-2320 C

Reviews:

Related manuals for E-2320 C

Brands by name

Popular brands