Barco DP2K-E series, User And Installation Manual

Page: 113 / 163

14. Preventative maintenance actions
14.2 3 month maintenance actions
MAINTENANCE TYPE B (perform every three months)
The 3 month maintenance actions, listed below, may be performed by a trained projectionist who is familiar
with potential hazards associated with the product.
No. Maintenance action Remarks
1 Clean the back air outlet vents of the lamp modules and Lamp Power Supply
(LPS). Dust the vents using a vacuum cleaner
with brush attachment.
2
Clean the housing of your projector.
Remove excess dust on and around
the projector covers. See cleaning
instructions in this manual.
3 Verify the internal clock of the ICMP with real time clock. Correct if needed. ICMP version 1.2.1 is required.
Communicator version 5.0 is required.
See user guide of Communicator for
detailed instructions.
4
Check the lamp module compartment and lamp fan for dust. Clean if necessary. Use a vacuum
cleaner with brush attachment to
remove dust.
R5906693 DP2K-E SERIES 19/06/2015 109