Barco Coronis, User Manual

Page: 56 / 65

On-screen display (OSD)
56
To select a DICOM offset:
1.
Select the DICOM display function. See
To select a display
function (DF):
, on page 53.
2.
Switch Continuous DICOM ALC off. See
To switch continuous
DICOM ALC on/off:
, on page 55.
3.
In the ALC & DICOM Options menu, use Up or Down to select
DICOM Offset
. Use Enter to go into edit mode.
4.
Use Up or Down to select an offset.
5.
Use Enter to save the changes.
You can select the following offsets:
Value Description
Dark Room The DICOM DF will be recalculated
taking an ambient light value of 0
lux into account.
This means that the measured
ambient light does
not
influence
the DICOM DF.
Preset The DICOM DF will be recalculated
taking a preset ambient light value
into account. This value is deter-
mined by the selected Reading
Room and can be adjusted manu-
ally within certain limits.