On-screen display (OSD)
61
6.
Use Enter
to save the changes.
Switching Power LED on/off
To switch the power LED on/off:
1.
Touch any of the soft touch keys.
The front illumination is switched on.
2.
While the illumination is on, touch the Enter
touch key to
display the main menu.
3.
Use the Up
or Down
touch keys to select the
Settings
menu.
Use Enter
to open the menu.
4.
Use Up
or Down
to select
Power LED
. Use Enter
to go into
edit mode.
5.
Use Up
or Down
to select On or Off.
6.
Use Enter
to save the changes.
Note:
• When the display is switched in stand-by, the power LED will
turn orange, even if the power LED setting is switched off.
• When the power LED setting is switched off, the LED will still
turn on (green) when the display is on but receives no video
signal.
Enabling/disabling User Controls
To disable the user controls:
1.
Touch any of the soft touch keys.
The front illumination is switched on.
2.
While the illumination is on, touch the Enter
touch key to
display the main menu.
Summary of Contents for Coronis
