On-screen display (OSD)
62
3.
Use the Up
or Down
touch keys to select the
Settings
menu.
Use Enter
to open the menu.
4.
Use Up
or Down
to select
User Controls
. Use Enter
to go
into edit mode.
5.
Use Up
or Down
to select Off.
6.
Use Enter
to save the changes.
7.
Exit the OSD
Now the user cannot display the OSD again until the user controls
keycode is entered (see below).
To enable the user controls again:
1.
To enter the
user controls
keycode, the OSD must not be visible.
2.
Touch any of the soft touch keys to switch on the front
illumination.
3.
While the illumination is on, touch the following keys in successive
order:
Enter
,
Down ,
Up ,
Down ,
Enter .
As a result, the
User Controls
setting in the Settings menu is switched
on again.
Summary of Contents for Coronis
