Barco Coronis, User Manual

Page: 46 / 65

On-screen display (OSD)
46
Firmware information submenu
Runtime information submenu
Measurement information submenu
Name Description
Boot code ver-
sion The version of the boot code firmware
Run code ver-
sion The version of the run code firmware
FPGA1 code ver-
sion The version of the firmware code for
FPGA1
FPGA2 code ver-
sion The version of the firmware code for
FPGA2
Name Description
Display lifetime The time the display has been operating,
including power-save mode
Backlight life-
time The time the backlight has been operat-
ing. This is also the time the display has
been operating in on-mode (so not in
power-save mode)
Backlight runt-
ime The time the backlight has been operating
since the last time it was switched off
(e.g., in stand-by). This counter is reset
after 1092 minutes
Name Description
Internal temper-
ature The temperature measured on the Signal
board
IGuard tempera-
ture The temperature measured near the I-
Guard