Display information
39
Reading room definition
This function is available only when the DICOM display function is
selected and Continuous DICOM ALC is off.
To modify a reading room definition:
1.
Select the DICOM display function. See
To select a display
function (DF):
, on page 35.
2.
Switch Continuous DICOM ALC off. See
To switch continuous
DICOM ALC on/off:
, on page 36.
3.
In the ALC & DICOM Options menu, select
Reading Room Def
.
4.
Select the reading room definition you wish to modify. Thereto,
first select
Reading Room
. Select the appropriate reading room.
5.
To modify the
maximum ambient light
for this reading room,
select
Max. Ambient Light
and change the value.
You can change this value within certain limits determined by
the selected reading room.
6.
To modify the
Preset correction value
for this reading room,
select
Preset Corr. Value
and change the value.
You can change this value within certain limits determined by
the selected reading room.
7.
To modify the
Measured ALC Value
for this reading room, select
Measure ALC Value
and execute the function.
If the “Averaged Ambient Light” at that moment is lower than
the defined “Maximum Ambient Light”, the averaged ambient
light value is copied as Measured ALC value.
If the “Averaged Ambient Light” at that moment is higher than
the defined “Maximum Ambient Light”, the display will prompt
a warning for the user to take measures to adapt the ambient
light in the room to the selected reading room. Proceed as
follows:
• Use Enter
or click the control wheel. As a result the
Measured ALC value will be limited to the maximum