![background image](http://html1.mh-extra.com/html/barco/coronis-fusion/coronis-fusion_online-users-manual_3889263030.webp)
Display information
30
Note:
The
DPMS
system will power down the display when
the connected computer is left idle for a certain time.
Input Switch Mode
Select “
Auto
” if you wish the display to
select the video inputs automatically. If
only one video input is connected, the
image will be shown in the center of
the screen. If both video inputs are con-
nected, the video signal connected to
the “Left” input is shown on the left
side of the screen and the signal con-
nected to the “Right” connector is
shown on the right side. If one of the
video signals exceeds the resolution of
1640x2048, the signal is suppressed.
Select “
Left
” to display only the signal
connected to the “Left” video input.
Select “
Right
” to display only the signal
connected to the “Right” video input.
Preferred Input
Select the video resolution you wish the
connected graphic board(s) to repro-
duce. Before changing this setting you
must switch off the PC. After changing
the setting, switch on the PC so that the
graphic board changes its resolution.
This function takes effect with plug-
and-play graphic boards only.
More information can also be found in
the Getting Started manual.
Exclude I Guard zone
When switched on, the video resolution
of the preferred input is set to a value
with a reduced number of lines. The
image will be displayed below the I-
Guard patch.
Scaling
When switched on, the display will
enlarge (scale up) low resolution video
signals if possible.
Name
Description