Display information
22
Note:
When you change the luminance target, the display will
adjust its backlight to reach the target. This can be seen in the
Measured luminance line.
When the luminance target cannot be reached, e.g., due to aging of
the backlight, the Measured luminance line changes to
Minimum
value reached
or
Maximum value reached
.
Color definition submenu*
* Available only on color displays
A color target is defined by its luminance target and color
temperature. The color definition submenu allows to edit these
values.
Viewing mode
Allows to select the viewing mode:
Diagnostic or Text. In text mode the
luminance is approximately half of the
luminance in diagnostic mode. This is
intended for use with office applications
such as word processing. You can also
switch between both modes by touch-
ing the up and down keys at the
same time while the OSD is not on the
screen.
Color definition
Jumps to the color definition submenu,
which allows to change the definition of
the user-defined color targets.
Name
Description
Name
Description
Color name
Indicates the color target you are edit-
ing. You can select another color target
to edit by using the Up
and Down
touch keys or by rotating the control
wheel.