Barco Coronis 5MP Mammo, User Manual, Page: 30 / 88

30
Coronis 5MP
As a result, the display will switch on or will switch to stand-by mode.
When the display is
switched on , the power LED is blue . When the
display is in stand-by mode , the power LED is orange .
The power LED can be disabled in the OSD menus. Please refer
to
“Power status indicator light” on page 34 for detailed
instructions on how to do this.
In case of a power outage recovery, your display will always
start-up in the power mode it was in before the power
interruption (i.e. stand-by or on). This protects your display
against inadvertent image retention problems.