8. Input menu
When:
Free run
Output is locked on an internal sync (60 Hz)
Automatic
Output is locked on the selected input for the main window
Input 1
Output is locked on source 1
Input 2
Output is locked on source 2
The options menu changes depending on the selection.
Image 8-6
Image 8-7
Image 8-8
When Input locking is set to Automatic or on a speci
fi
c input and there is no sync signal available, the locking
will be switched to Free run without changing the user settings. Once the sync is available, it applies again
the user settings.
Options for Free run
When
Free run
is selected (arrow in front of it) and then the
Options
are selected, the following menu appears:
Image 8-9
Use the
▲
or
▼
key to select
Manual lock
and press
ENTER
to toggle between
On
and
Off
.
Manual lock on :
locking is done on the indicated vertical frequency which can be changed by the user.
Manual lock off :
locking is done on an internal sync (60 Hz).
To change the locking frequency for manual lock on, use the
▲
or
▼
key to select
Vert freq
and press
ENTER
to activate. The
fi
rst
digit is selected.
Use the
▲
or
▼
key to select the desired digit and press
◄
or
►
key to select the next digit in the address or enter the value with
the digit keys on the remote control or local keypad. The next digit in the value will be automatically selected.
Options for Automatic or speci
fi
c input
When
Automatic
or speci
fi
c input is selected (arrow in front of it) and then the
Options
are selected, the following menu appears:
Image 8-10
Use the
▲
or
▼
key to select
Genlock
and press
ENTER
to toggle between
On
and
Off
.
66
R59770021 CLM R10+ 11/10/2010
Summary of Contents for CLM R10+ R90501001
