Barco CLM R10+ R90501001 User Manual Download Page 191

Page: 191 / 229

17. Projector covers, removal and installation

Image 17-14
Secure back cover

17.9 Installation of the front cover

Front cover can only be installed after that the side covers and top cover are installed.

Necessary tools

Flat screwdriver

How to install the front cover

1. Insert the top of the front cover behind the front of the top cover (slant the cover a little bit before inserting (A) ). (image 17-15)

2. Pull the bottom side of the front cover toward the projector (B).

The sides of the front cover overlap the sides of the side covers.

3. Fasten the captive screw at the middle bottom of the front cover (C). (image 17-16)

R59770021 CLM R10+ 11/10/2010

187

Summary of Contents for CLM R10+ R90501001






































































































































































































































Search results

Summary of Contents for CLM R10+ R90501001

Reviews:

Related manuals for CLM R10+ R90501001

Brands by name

Popular brands

Barco CLM R10+ R90501001, User Manual

Search results

Summary of Contents for CLM R10+ R90501001

Reviews:

Related manuals for CLM R10+ R90501001

Brands by name

Popular brands