2. Introduction to ClickShare
2
1
3
2
Image 2-3
The Base Unit
1
USB port
2
Status LED strip
3
Standby Button
Table 2-3
USB Port
The USB port is used to update the software of both the Base Unit and the Buttons.
When plugging in the Button into the Base Unit, the Button is paired to the Base Unit. The Base Unit checks whether the software
and
fi
rmware of the Button is up to date. If not, the Base Unit updates the software and/or
fi
rmware.
Status LED strips
The color of the LEDs at the front of the Base Unit give information on the status of the system.
LEDs behavior
Explanation
static red
•
receiving content from the Buttons and streaming towards the display.
•
pairing and software update of the Button is done. You can now unplug the
Button from the Base Unit.
•
during the
fi
rst phase of the Base Unit boot process.
blinking white
•
system is starting up (during the second phase)
•
Button pairing is in progress
•
software update of the Base Unit
slow blinking white
•
standby mode (i.e. muting the display output)
static white
•
awake and ready (i.e. showing the welcome message on the display)
•
pairing is done
red blinking
•
an error occurred
Standby button
The button at the front of the Base Unit has a power on/off function and a standby function.
•
When the system is awake, a short push triggers the system to go into standby mode.
•
When the system is in standby mode, a short push triggers the system to wake up.
•
When the system is powered on, a long push makes the system to shut down and power off.
•
When the system is shut down, a long push or short push triggers the system to start up.
R5900001 CLICKSHARE 08/07/2013
7
