20
Install the Transformer. Connect the Transformer to Power Source and Turn on the Lights.
3
Install the Transformer Mounting Bracket to the underside of the Left Panel of the Bowl Frame using
2 Phillips Head Screws 1/4"x1/4" and 2 Plain Washers 1/4" and tighten securely (see Fig. 1).
Attach the Transformer to the Transformer Mounting Bracket by inserting the two stud bolts on the transformer
bracket into the two key holes on the Mounting Bracket as shown. Press the Transformer downward until
it rests in place. (see Fig. 2 & Fig. 3).
Insert Transformer-Plug into Transformer-Socket and tighten securely. (see Fig. 4).
Depending on your island construction, you may need to make one hole on your Rear Island Panel. Make
sure the cord doesn't touch the ground. Connect the Transformer power supply cord plug into a properly
grounded 120VAC outlet.
Turn on the Grill Lights by pushing the Left Light Switch on the Control Panel.
Turn on the Control Knob Seat LED Lights by pushing the Right LED Switch on the Control Panel.
Fig. 4
Fig. 2
Fig. 3
2
Install Grill Head
With the help of your assistants, place the Grill Head into the cutout of your grill island (See Diagram).
NOTE: The grill head is designed to fit into an island of your own design. The island shown in
the diagram is for illustration purposes only. The diagram is not drawn to scale. An island is not
included with the purchase of this grill head. Be sure your island meets the construction guidelines
and clearances as indicated in pages 25 and 26.
Plain Washer 1/4"
Qty. 2
Part # S411G04011
Phillips Head Screw
1/4"x1/4"
Qty. 2
Part # S112G04041
Wire
Transformer-socket
Transformer-plug
AC-plug
Fig. 1
Note:
The Transformer can
be attached to the top two
holes or the lower two holes.
For illustration purposes, the
Bowl is not shown.
Transformer
Transformer Mount-
ing Bracket
Note:
Make sure the
plug does not touch
the ground.
