1
Appliance
2
Insulated cable duct
3
Steel studs
Figure 31. TV installation above the appliance (rear view)
5.3
Prepare the appliance for use
•
Do all the procedures in this section. Optional procedures are indicated with
(optional).
5.3.1
Do a check on the overpressure hatches
1.
Make sure that the overpressure hatches are loose. Push the overpressure hatches
up and lower them back in position.
2.
Do a check on the gasket of the overpressure hatches. The gasket must seal the
opening.
3.
If necessary, replace the gasket. Lift the hatch and twist it to remove the hatch and to
get access to the gasket.
5.3.2
Do a check on the operation of the lighting
•
Make sure that the operation of the ambient lights functions well. To operate the
lights with the remote control, refer to the user manual
Installation
Gas Fire Front 90-60
47
Summary of Contents for 90-60 PF2
