Table 10: Overview of the availabe sizes and models of the BARBAS AirBox
BARBAS AirBox
Model
Air vent opening surface
AirBox 160
Insert Frameless
110 cm
2
Insert Slim Frame
Insert Classic Frame
Insert Built-in Frame
AirBox 320
Insert Frameless
220 cm
2
Insert Slim Frame
Insert Classic Frame
Insert Built-in Frame
and
5.2
Installation procedure
Note:
The appliance is factory set to the correct nominal heat input. The pilot light is
set to the correct level of gas consumption.
•
Do all the procedures in this section. Optional procedures are indicated with
(optional).
5.2.1
Preparation
Do the following preparatory work before the start of the installation of the appliance:
• Make sure the gas supply line is near the intended location of the appliance, to make it
possible to connect the gas supply line with the appliance gas connection.
• Install a 230 VAC earthed electrical socket near the intended location of the appliance.
• If the optional Opti-Vent flue system will be installed, make sure to Install an extra 230
VAC earthed electrical socket near the intended location of the appliance
• Build the insulating walls behind the intended location of the appliance according the
requirements of chapter
before the installation of the appliance starts.
Installation
36
Gas Fire Front 90-60
Summary of Contents for 90-60 PF2
