11.7 Mexican Importer
Banner Engineering de Mèxico, S. de R.L. de C.V.
David Alfaro Siqueiros 103 Piso 2 Valle oriente
San Pedro Garza Garcia Nuevo Leòn, C. P. 66269
81 8363.2714
11.8 FCC and ISED Certification, 900 MHz, 1 Watt Radios
This equipment contains transmitter module RM1809.
FCC ID: UE3RM1809
IC: 7044A-RM1809
HVIN: RM1809
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This device contains licence-exempt transmitters(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject
to the following two conditions: (1) This device may not cause interference, and (2) This
device must accept any interference, including interference that may cause undesired
operation of the device.
Cet appareil contient des émetteurs/récepteurs exemptés de licence conformes à la norme
Innovation, Sciences, et Développement économique Canada. L’exploitation est autorisée
aux deux conditions suivantes: (1) L’appareil ne doit pas produire de brouillage, and (2)
L’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
FCC Notices
IMPORTANT: The transmitter modules RM1809 have been certified by the FCC / ISED for use with other products without
any further certification (as per FCC section 2.1091). Changes or modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment.
IMPORTANT: The transmitter modules RM1809 have been certified for fixed base station and mobile applications. If
modules will be used for portable applications, the device must undergo SAR testing.
IMPORTANT: If integrated into another product, the FCC ID label must be visible through a window on the final device or it
must be visible when an access panel, door, or cover is easily removed. If not, a second label must be placed on the outside
of the final device that contains the following text:
Contains Transmitter Module RM1809
FCC ID: UE3RM1809
IC: 7044A-RM1809
HVIN: RM1809
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Note
This equipment has been tested and found to comply with the limits for a digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
•
Reorient or relocate the receiving antenna,
•
Increase the separation between the equipment and receiving module,
•
Connect the equipment into an outlet on a circuit different from that to which the receiving module is connected,
and/or
•
Consult the dealer or an experienced radio/TV technician for help.
Sure Cross
®
DXM700-Bx Wireless Controller
www.bannerengineering.com - Tel: + 1 888 373 6767
69
