Set the Web Services to Use Authentication
1. At the Banner Cloud Data Services website, go to
Settings
>
Sites
.
2. To edit the site settings, click
Edit
on the line of the site name.
Figure 36. Settings > Sites screen of the Banner CDS website
At the bottom of the pop-up window is a checkbox to enable authentication/validation.
3. Enter the same username and password as used in the DXM Configuration Software. The username and password
do not need to be a defined user within the Banner Cloud Data Services website.
8.2.2 Controller Configuration Authentication
The DXM700 can be programmed to allow changes to the configuration files only with proper authentication by setting up a
password on the
Settings
>
Administration
screen in the DXM Configuration Software.
With the DXM700 connected to the PC, click
Get Device Status
. The DXM700 status displays next to the button.
Figure 37. Settings > Administration screen
Use the DXM Configuration Software to:
•
Set the Admin Password
•
Change the Admin Password
•
Remove the Admin Password
To change or remove an admin password, the current password must be supplied. The DXM700 must be connected to the
PC to change the administration password.
Sure Cross
®
DXM700-Bx Wireless Controller
www.bannerengineering.com - Tel: + 1 888 373 6767
49
