•
Wiring Diagram (removes all other tabs and worksheets from the PC Interface and displays only Wiring
Diagram and Equipment views)
•
Fault Log—history of the last 10 faults.
NOTE: Fault Log numbering increases up to 4,294,967,295 unless the Controller power cycle is
performed, in which case the numbering is reset to start at 1. Clearing the Fault Log (either via
the PC Interface or the Onboard Interface) removes the log history but retains the numbering.
•
Configuration Log—history of up to 10 most recent configurations (only the current configuration can be viewed
or imported)
•
Module Information
Click Import Configuration & Network Settings to access the current Controller configuration and network settings
(depends on user access rights, see
on page 53).
4.16 Wiring Diagram
Figure 46. Wiring Diagram
The Wiring Diagram view shows the terminal assignments and the electrical circuits for the safety and non-safety inputs,
Safety Outputs, and status outputs, and any terminals that are still available for the selected module. Use the wiring
diagram as a guide to physically connect the devices. Navigate between modules using the Page Navigation toolbar at the
top right corner of the PC Interface.
XS/SC26-2 Safety Controller
55
