LED Status
Description
Signal Strength
Output 1/2
Off
Normally Open = Off
Normally Closed = On
There is no detectable object within the switch point distance that is
returning a signal greater than the minimum signal strength threshold of
one.
Flashing
Normally Open = Off
Normally Closed = On
An object is detected, however, the output is off because the returned
signal strength is below the user-defined threshold. The flash rate
increases as the signal strength increases.
Flashing
Normally Open = On
Normally Closed = Off
A target is detected and the returned signal strength is stronger than the
user-defined threshold. The flash rate increases as the signal strength
increases.
On
Normally Open = On
Normally Closed = Off
A target is detected and the signal is four times stronger than the user-
defined signal strength threshold.
R-GAGE
®
Q130RA Sensor
www.bannerengineering.com - Tel: + 1 888 373 6767
5
