manualshive.com logo in svg

Banner R-GAGE Q130RA Series, Instruction Manual

Share
Download
Banner R-GAGE Q130RA Series Instruction Manual Download Page 22

9 Update the Software

Use this procedure to update the Banner Radar Configuration Software.

The Banner Radar Configuration Software automatically looks for updated software versions. The symbol 

!

 in the lower

right corner indicates that a software update is available.

Figure 7. Software Update Available

1. Click 

!

 in the lower right corner of the software.

The Banner Radar Configuration Software Update screen displays.

Figure 8. Banner Radar Configuration Software Update Screen

2. Click Upgrade to begin the process.

The Banner Radar Configuration Software closes and an installer (BannerRadarConfigInstaller.exe) downloads to the
desktop.

Note: If changes have not been written to the sensor, the system asks whether you want to exit
the program. Click No to stop the update process and return to the Software. Write the changes
to the sensor, then return to step 1, above, to update the Software.

3. Navigate to and open the file BannerRadarConfigInstaller.exe.
4. Depending on your system settings, a popup window may appear prompting to allow Banner Radar Configuration

Software to make changes to your computer. Click Yes.

5. Click Close to exit the installer.

The software update is complete.

R-GAGE

®

 Q130RA Sensor

 

 

22

www.bannerengineering.com - Tel: + 1 888 373 6767

 

Summary of Contents for R-GAGE Q130RA Series



























Reviews:

No comments

Brands by name

Popular brands

Load more brands