manualshive.com logo in svg

Banner iVu Plus TG Gen2, Instruction Manual

Share
Download
Banner iVu Plus TG Gen2 Instruction Manual Download Page 77

 

A

B

C

D

do trigger\x0D\x0A

OK\x0D\x0A

 

A

Control Device, which can be a PLC, PC program, or a terminal C

Response Frame

B

Request Frame

D

iVu Plus TG Sensor

The following are some of the functionality available via the command channel:

•

Get sensor information (such as version and sensor name)

•

Control "discrete" I/O (such as trigger and teach)

•

Get sensor results (such as sensor status)

•

Change the running inspection

Command Channel Sample Application
The iVu Plus TG installation CD has a Command Channel sample application that provides an easy interface to execute

commands. In a production environment, you will need to create your own application for bi-directional communication

with the sensor.

 

 

8.1.4 Data Export

The iVu Plus sensor provides for exporting user-selected inspection data via either Ethernet or the RS-232 serial interface.

Inspection data that can be exported includes:

•

Pass/Fail Output

•

Inspection Name

 

 

iVu Plus TG Gen2 Image Sensor

 

www.bannerengineering.com - Tel: 763.544.3164

77

Summary of Contents for iVu Plus TG Gen2

















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands