manualshive.com logo in svg

Banner IVU BCR Series, Instruction Manual

Share
Download
Banner IVU BCR Series Instruction Manual Download Page 4

1 Overview of the Sensor

The iVu BCR sensor reads a wide variety of barcodes. The package consists of sensor, lighting, lens, and display. Cables

and mounting brackets can be ordered for each application. Additionally, other lenses, filters, and external lights are

available. Installation, setup, and configuration can be done quickly without requiring a PC.

•

No PC required to configure the sensor

•

USB port for uploading and downloading of inspections and log files for easy updating and diagnostics

•

Image processing expertise is not required

•

Integrated or remote color touch screen display

•

High speed processing

The iVu BCR reads the following barcode types:

•

DataMatrix (ECC 200) barcodes

•

QR Code (QR and Micro QR)

•

Linear barcodes: Code128, Code39, CODABAR, Interleaved 2 of 5, EAN13, EAN8, UPCE, Postnet, IMB, and

Pharmacode

1.1 Installation

1.1.1 Components

iVu with Integrated Display

The iVu Series sensor comes fully assembled with the lens and an integrated ring light if so ordered. The integrated

touchscreen display has a plastic cover to protect the display. Remove this cover when setting up the sensor. When the

display is not in use be sure to keep the display covered to protect it.

If an integrated ring light is not used, another light source is needed. Various lights are available from Banner. Operating

in external trigger mode requires a triggering source (for example, the Banner WORLD-BEAM

®

 QS18VN6D sensor).

 

1

Focusing Window

2

Focusing Window Locking Clip

3

LED - Green: Ready; Red: Error

4

LED - Green: Pass; Red: Fail

5

Integrated Display

A

8-pin Euro-style (M12) female USB Cable Connector

B

12-pin Euro-style (M12) male Power and I/O Cable Connector

C

Mounting Bracket Mounting Holes (uses supplied three M4 x 4 mm

screws)

iVu Barcode Reader (BCR)

 

 

 

4

 

Summary of Contents for IVU BCR Series






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands