manualshive.com logo in svg

Banner IVU BCR Series, Instruction Manual

Share
Download
Banner IVU BCR Series Instruction Manual Download Page 23

LCD Timeout

Main Menu > System > Display Settings > LCD Timeout

The LCD screen dims after a user-selectable period when the device is not being used. Use the arrow keys or slide the bar

at the bottom of the screen to set the LCD screen time out.

NOTE: This screen is not available in the Emulator.

Touch Calibration

Main Menu > System > Display Settings > Touch Calibration

Touchscreen Calibration may be necessary if the software does not correctly respond when an icon on the screen is

pressed. The calibration routine aligns the touch screen's coordinates to the display behind it. Be sure to follow the

prompts on the screen when executing the Touchscreen Calibration function.

NOTE: This screen is not available in the Emulator.

Advanced

Main Menu > System > Display Settings > Advanced

The Advanced Display screen allows you to enable the Optimize Display Response option. This feature helps to make the

display more responsive when the sensor is busy (either inspection times are long and/or no idle time exists between

inspections). Disable this feature if Missed Triggers occur due to touchscreen presses. With this setting disabled, the

display may become sluggish when the sensor is busy.

2.2.8 Reboot Sensor

Main Menu > System > Reboot Sensor

The Reboot Sensor screen allows you to force a reboot of the sensor.

NOTE: This option is not available on the Emulator.

2.2.9 Firmware Update

Main Menu > System > Firmware Update

The Firmware Update screen is used to load the latest sensor firmware. The Firmware Update screen lists the firmware

versions it finds in the BANNER\FIRMWARE folder on the USB flash drive. When you receive a firmware update from

Banner Engineering, be sure to put it in the BANNER\FIRMWARE folder on the USB flash drive.

NOTE: The Firmware Update menu is not available in the Emulator.

2.3 Imager Menu

Main Menu > Imager

The Imager menu icon is on the Main Menu, and lists parameters that affect the characteristics of the captured image. The

Imager menu is used to access the Auto Exposure routine, manually adjust Exposure and Gain, set Trigger and Strobe

options as well as the size of the field of view (FOV).

 

 

 

iVu Barcode Reader (BCR)

 

23

 

Summary of Contents for IVU BCR Series






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands