Model
Description
BF1801L024
18 amp
positive-guided
contactor, 3 N.O., 1 N.C. (N.C. contact rated at 10 amps)
8.2.4 Lens Shield
Constructed of 1.5 mm (0.06 in) clear polycarbonate;
attach
to sensor using supplied adhesive-backed Neoprene foam strips.
Note: The total range decreases by approximately 10% per shield.
Lens Shield Model
Sensor
Defined
Area Height
Lens Shield Length
LSS-150
150 mm (5.9 in)
210 mm (8.3 in)
LSS-300
300 mm (11.8 in)
360 mm (14.2 in)
LSS-450
450 mm (17.7 in)
510 mm (20.1 in)
LSS-600
600 mm (23.6 in)
660 mm (26.0 in)
LSS-750
750 mm (29.5 in)
810 mm (31.9 in)
LSS-900
900 mm (35.4 in)
959 mm (37.8 in)
LSS-1050
1050 mm (41.3 in)
1109 mm (43.7 in)
LSS-1200
1200 mm (47.2 in)
1259 mm (49.6 in)
LSS-1350
1350 mm (53.1 in)
1409 mm (55.5 in)
LSS-1500
1500 mm (59.1 in)
1558 mm (61.3 in)
LSS-1650
1650 mm (65.0 in)
1708 mm (67.2 in)
LSS-1800
1800 mm (70.9 in)
1858 mm (73.1 in)
8.2.5 EZ-LIGHT
®
for EZ-SCREEN
®
Provides clear, 360°
indication
of the of the EZ-SCREEN receiver's output status. Use with a CSB
splitter
cable and
optional
DEE2R
double-ended cables. See data sheet p/n 121901 for more
information.
Models
Construction
Connector/LED
Function/Inputs
M18RGX8PQ8 8
Nickel-plated brass housing, M18x1 thread;
thermoplastic
lens
Fully encapsulated IP67
8-pin Euro-style Integral QD
Red/Green
indication
follows OSSD output of
the EZ-SCREEN receiver
ON Red:
Power ON Beam Blocked or Lockout
ON Green:
Power ON Beam Clear
PNP (Sourcing)
T18RGX8PQ8
Thermoplastic
polyester housing,
thermoplastic
lens
Fully encapsulated IP67
T30RGX8PQ8
K30LRGX8PQ8
Polycarbonate housing, 30 mm
thermoplastic
dome, 22 mm base mount
Fully encapsulated, IP67
8 Available in a kit that includes one M18 EZ-LIGHT, one SMB18A
mounting
bracket, and hardware for
mounting
to the side channel of an EZ-SCREEN housing (kit
model number EZA-M18RGX8PQ8).
EZ-SCREEN
®
Type 2 Light Screen
www.bannerengineering.com - Tel: 763.544.3164
49
