Information 3
Information
There is no need for a special ServiceTool as known from other Bang & Olufsen products, when maintaining or servicing the ML Gateway. All types
of service or adjustments take place from a web-based user interface.
Access
To access the web-based user interface, enter the IP address for ML Gateway. When ML Gateway is delivered, the IP address is set to a static value.
The default IP address for ML Gateway is
192.168.1.10
(
factory default).
Depending on the customer’s network settings, it may be necessary to change the IP address in order to fit the network range.
Please note
This installation guide is designed to give the installer the opportunity to understand and follow an installation process in the relevant situation. It will
ensure a correct setup of ML Gateway and thereby a smooth operation.
This installation guide describes the setup procedure for the different supported devices, and the currently defined list contains:
- Clipsal
- Conson XP
- Custom strings (up to 4 drivers)
- Dynalite
- IP Camera
- KNX / EIB
- Lauritz Knudsen, IHC, Schneider, LexControl
- Legrand / BTicino
- Lutron Grafik Eye
- Lutron Grafik QS
-- Lutron HomeWorks
- Lutron HomeWorks QS / Radio Ra2
- Lutron Radio RA
- Scheduler
- SmartHouse
- Vantage
- 3rd part drivers to AMX / Creston (more in the future)
! When installing ML Gateway on the Chinese market, please read the information regarding RoHS directive (appendix -> technical specifications).