manualshive.com logo in svg

Bang & Olufsen ML Gateway, Installation Manual

Share
Download
Bang & Olufsen ML Gateway Installation Manual Download Page 21

Programming     21

-  Refer to the 

System information

 window and confirm that the software version is 

2.7.166 or higher

!  If the software version is older than version 2.7.166 the IHC controller must be updated to 

the newest version. Contact the home automation installer to update the IHC controller.

-  Choose Access control from the 

LK IHC Administrator

 menu 

 

-  Put a checkmark in the box for 

Open for third party products

  The IHC controller is now ready to commnuicate with ML Gateway. Disconnect the USB cable from the service PC and the ML Gateway. The next 

step is to load the IHC definition file to the ML Gateway.

-  Reconnect the Service PC to the network and access the web-based user interface 

 

(by typing the IP address for ML Gateway in a web browser).

-  Go to 

Programming

 -> 

Devices

 -> 

IHC/LexControl 

-  Type an optional description and the IP address for the controller
-  Click the 

Add resources...

 button in the Resources section.

-  Click the 

Browse

 button to open the 

Open

 popup window.

-  Choose the definition file from the project and click 

Open 

(contact the home automation 

  installer regarding how to export the definition file to the service PC).

-  Click the 

Load

 button and the project file is loaded to the Resource section.

Summary of Contents for ML Gateway



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands