Socket panels
The socket panel on BeoSystem 2 allows
you to connect signal input cables as
well as a variety of extra equipment,
such as a DVD player or a linked Bang &
Olufsen audio system.
The V.TAPE, AV and DECODER sockets
are available for connection of extra
equipment.
Any equipment you connect to these
sockets must be registered in the
Connections
menu. For further
information, refer to the chapter
‘
Register and use additional video
equipment’
on page 32 in the Guide.
AV and aerial socket panel
V.TAPE
21-pin socket for the connection of a BeoCord
V 8000 video tape recorder.
AV
21-pin socket for the AV connection of other
equipment, such as a DVD player, set-top box or a
second decoder. Do not connect baseband
decoders here.
DECODER
21-pin socket for the connection of a secondary
set-top box or a primary decoder. The socket
provides the opportunity to connect either an AV
decoder or an RF decoder.
The socket may be used for an AV 2 Expander
instead, which gives the opportunity to connect a
decoder or other non-Bang & Olufsen auxiliary
video equipment at the same time.
MASTER LINK
Socket for connection of a compatible Bang &
Olufsen audio system.
The socket is also used for BeoLink distribution of
sound throughout the house.
LINK
Aerial output socket for distribution of video
signals to other rooms.
VHF/UHF
Aerial input socket from your external aerial or
cable TV network.
ATTN. ON/OFF
Aerial signal attenuator. Options are:
OFF:
Normal setting
ON:
Signals damped
IR OUTPUT
For connection of a set-top box.
VGA-IN
Socket for connection of a High Definition video
source or a PC.
SPDIF 3
Digital input socket for connection of, for
example, a DVD player. SPDIF 3 is for digital input
from equipment connected to the VGA-IN socket
on BeoSystem 2.
DECODER
MASTER LINK
AV
V.TAPE
IR-OUT
VGA-IN
SPDIF
3
VHF/UHF
LINK
75
Ω
ATTN.
OFF ON
9
AV and aerial socket panel.