Connect an AV or RF decoder
To connect an AV decoder (a baseband
decoder, such as Canal+), connect the cable
from the aerial to BeoSystem 2. Connect the
AV decoder to the 21-pin socket marked
DECODER on BeoSystem 2.
If you wish to connect an RF decoder, then
remember to connect the external aerial
cable to the decoder input socket and then
forward the cable to the BeoSystem 2 aerial
socket (marked VHF/UHF). Connect the RF
decoder to the 21-pin socket marked
DECODER on BeoSystem 2.
Connect two decoders
To connect two decoders to BeoSystem 2,
connect your primary decoder to the
DECODER socket and your secondary decoder
to the AV socket on BeoSystem 2.
Do not connect an unclamped baseband decoder
to the AV socket!
BeoSystem 2
21
Decoder 1
Decoder 2
