Socket panel – plasma screen
The socket panel on the back of the screen
contains sockets for connection to BeoSystem 2.
DVI
Socket for connection of a High Definition video
source or a PC.
PC IN
Socket for connection to the RGB socket on
BeoSystem 2.
SERIAL
Socket for connection to the RS232 socket on
BeoSystem 2.
For the installer…
When connections are complete, you must select
the screen type in a Service menu.
While BeoVision 4 is on…
> Press
MENU
to bring up the main menu.
> Press
p
to highlight
Setup
and press
GO
.
> Press
0
twice, followed by
GO
. The
Service
menu appears.
> Press
1
to bring up the
Monitor
menu.
> Press
p
to highlight
Plasma version setup
, and
press
GO
.
> Press
m
or
p
to select the screen type and press
GO
to store it.
> Press
EXIT
to leave the menu.
> Press • to switch off the system.
IMPORTANT! If you wish to connect a computer
to the screen and use the screen as a monitor,
make sure that BeoSystem 2, BeoVision 4, the
computer, and all equipment connected to the
computer are all disconnected from the mains
before you connect the computer and the screen
to each other. In addition, the computer must be
connected to a grounded wall outlet as specified
in the computer’s setting-up instructions.
DVI
PC IN
SERIAL
IR-IN
FAN
0/12 V CONTROL
MAINS
RGB
ON/OFF
RS232
PHONES
L
R
VIDEO
S-VHS
11