Close-up socket panel on BeoSystem 2
You can connect headphones and
listen to a TV programme, or you can
connect a Camcorder and watch your
home movies on BeoVision 4. If you
have connected, for example, a
BeoCord V 8000 video tape recorder,
you can copy Camcorder recordings
onto a videotape.
The close-up socket panel
S-VHS
For the connection of S-VHS or Hi-8 Camcorders
only.
VIDEO – R – L
These sockets are for connection of a video
camera:
L – R:
For audio connection (right and left
sound channel respectively).
VIDEO: For the Video signal.
PHONES
You can connect stereo headphones to the socket
marked PHONES. The speakers connected to
BeoSystem 2 can then be cut out by pressing the
middle of the Beo4 volume button.
Watch Camcorder on BeoVision 4
To watch your Camcorder recordings, connect
the Camcorder and switch BeoVision 4 on.
When you start playback on your Camcorder,
BeoSystem 2 automatically registers the
signal and you can see the pictures from the
Camcorder on BeoVision 4.
If the signal from the Camcorder is switched
off…
> Press
LIST
repeatedly to display CAMERA on
Beo4 and press
GO
.
In order to display CAMERA on Beo4, you must
first add it to the Beo4 list of functions. For further
information, refer to the chapter ‘Customise Beo4’
on page 32.
Copy from a Camcorder
If you have connected a video tape recorder,
such as a BeoCord V 8000, to BeoSystem 2,
and you connect your Camcorder to the
Camcorder and headphones sockets, you can
copy Camcorder recordings onto a videotape.
While the tape is being copied, you can watch
a TV programme or switch BeoSystem 2 to
standby.
To copy a recording from a Camcorder…
> Connect your Camcorder and start playback on
the Camcorder.
> Press
RECORD
to prepare BeoCord V 8000 for
recording.
> Press
RECORD
again to start recording.
> Press
V MEM
and then
STOP
to pause a
recording.
> Press
RECORD
to resume a paused recording,
or…
> …press
STOP
again to stop a recording entirely.
PHONES
L
R
VIDEO
S-VHS
12
