Connect a High Definition source or PC
You can connect a High Definition (HD)
source, such as a set-top box or DVD
recorder, to BeoSystem 2. This gives you
access to digital video sources. You can
also connect a PC.
You can also connect these sources to
BeoVision 4.
Make sure you register all connected
equipment in the BeoSystem 2
Connections
menu. Note, however, that
connection of HD sources may limit or
change some BeoSystem 2 functions.
These limitations and changes are
described in this chapter.
For further information about the
Connections
menu, refer to page 40.
Connection
The VGA-IN socket on BeoSystem 2 is for
connection of a HD source, such as a set-top
box, or a PC. Examples of possible setups are
shown below.
VGA-IN
DECODER
V TAPE
AV
SPDIF1
L R VIDEO
DVI
PC
V MEM
DVD
HD STB
BeoSystem 2
BeoVision 4
VGA-IN
DECODER
SPDIF1
L R VIDEO
DVI
PC
HD STB
BeoSystem 2
BeoVision 4
DVI
SPDIF3
VGA-IN
HD STB
PC
BeoSystem 2
BeoVision 4
22
In the
Connections
menu:
– Set
Decoder
to
STB (DTV/Ypbr)
or
STB (AUX/Ypbr)
– Set
Camera
to
PC (DVI)
.
If you wish to connect a HD set-top box or other
HD source to BeoSystem 2, note that this requires
a special cable, which is available from your
Bang & Olufsen retailer.
In the
Connections
menu:
– Set
AV
to
DVD
– Set
V Mem
to
V Mem
– Set
Decoder
to
PC (VGA)
– Set
Camera
to
STB (DTV/DVI)
or
STB (AUX/DVI).
In the
Connections
menu:
– Set
Decoder
to
PC (VGA)
– Set
Camera
to
STB (DTV/DVI)
or
STB (AUX/DVI).