Bang & Olufsen BeoMedia 1 Installation Manual Download Page 5 | Manualshive

Page: 5 / 24

Bang & Olufsen BeoMedia 1 Installation Manual Download Page 5

BeoMedia 1 Installation Guide

Page 4

BeoVision TV with SCART - Y/C input/CVBS input:

Page 4

BeoVision TV with VGA input:

Page 5

BeoVision TV with DVI-I input:

Page 6

BeoVision

US

Model

Page

7

BeoVision TV with SCART - Y/C input /CVBS input

This solution is used for, among others, the MX family, BeoVison 1, BeoCenter1, Avant, BeoVision 3, BeoVision 5 and
BeoVision 6-22 where the used SCART input supports a Y/C signal or a CVBS signal.

Make all the connections shown in the diagram, but

do

not connect the power supply to BeoMedia 1 until

the TV has been configured.

Note: Remember to connect keyboard and mouse to BeoMedia 1.

Video:

Connect the S-Video and/or the CVBS output on BeoMedia 1 to the SCART socket on the BeoVision.

Audio:

Connect the mini jack to the audio socket on BeoMedia 1.

Network:

Do not connect the network cable or fit any wireless PCMCIA network card until BeoMedia 1 has
been configured and tested in stand-alone mode.

Go to page 7.

«
...
3
4
5
6
7
...
»

Summary of Contents for BeoMedia 1

























Reviews:

No comments