BeoMedia 1 Installation Guide
Page 15
Setting up screen resolution
If Y/C or CVBS is used no further changes are needed.(Chapter 8)
If DVI-I or VGA is used the following steps need to be carried out.
1.
Click “Start”, and click “Control Panel”
2.
Open “Display” in Control Panel,
(“Display Properties” dialog appears)
and click “Settings”
3.
On the Settings tab select the “Advanced” button
4.
Select setting tab “Monitor”
5.
Make sure that the check mark by
“Hide modes that this monitor cannot display”
is removed
6.
Apply this setting
