manualshive.com logo in svg

Bang & Olufsen BeoMedia 1, Installation Manual

Share
Download
Bang & Olufsen BeoMedia 1 Installation Manual Download Page 24

BeoMedia 1 Installation Guide 

 

Page 23 

10. Saving settings 

 

To be able to return at any time to the entered configurations, the settings need to be saved. This is done by entering 
the configuration menu and select “Recovery”.  

   

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Now go to “Save settings” and press <GO> on Beo4. Now all settings entered during this installation process are saved. 
It will be possible to restore BeoMedia 1 to these settings in the future by following the recovery procedure (not 
described in this document). 

  

11. Maintaining system software 

 

BeoMedia 1 is updated automatically via the Internet, as BeoMedia 1 contacts the server at Bang & Olufsen on a daily 
basis to check whether a newer version of the installed program elements is available. If this is the case, the update is 
downloaded in the background and stored on the hard disk without disturbing the user.    
 
The following program elements in the BeoMedia 1 setup are updated: 

 

 

Operating system (Embedded XP) 

 

Antivirus program  

 

Bang & Olufsen BeoMedia 1 software 

 

Firmware  

 

  

The new BeoMedia 1 program update is automatically installed at a predefined time, provided that BeoMedia 1 is not in 
use. If it is in use, the system waits until the customer has excited the source menu, for example, PHOTO or N.RADIO. 1. 

 

 

Editing PC 
 

 

New BeoPlayer / BeoPort software  

 

 
 
A new version of BeoPlayer / BeoPort is saved on BeoMedia 1, and the customer receives a message on the editing PC 
informing him/her that an update is available for installation when the PC program is started. 

 

A new version can be installed without removing a previous version first. 

 

 
 

Note: the registration process should always be completed. 

Summary of Contents for BeoMedia 1

























Reviews:

No comments

Brands by name

Popular brands

Load more brands