Bang & Olufsen BeoCom 6000, Manual

Page: 56 / 66

56
Problem
The handset is not working.
The phone does not ring.
Redial is not working.
The indicator light on the BeoCom
6000 base does not shine green.
Registration is not working.
The connection between the
handset and the base is often lost.
The display indicates that the
Phonebook is full, even though
there are fewer than 200 entries.
Cause
The handset batteries are flat.
– The ringing signal is switched off;
– The Multiple Subscriber
Numbering (MSN) system has
been set up incorrectly (Applies
only to BeoLine ISDN).
– Pause between the first part of a
number and the second part of a
number has not been entered;
– The Redial number has not been
registered correctly;
– You are using a common handset
on a base other than base
number 1. The Redial list is only
registered in base number 1.
– Telephone numbers with fewer
than three digits are not stored in
the Redial list.
The charging contacts on the
handset and/or charger are dirty
The handset is already registered to
another base, or the base is already
registered to another handset.
The base placement might not be
optimal.
The numbers entered exceed 12
characters in length and thus
occupy more than one space in the
Phonebook.
Action
Charge the battery (page 10) or
check that the battery is inserted
correctly (page 17).
– Activate the ringing signal. Refer
to pages 52–53.
– Set up the MSN system correctly.
Refer to pages 38–39.
Check that numbers are entered
correctly.
Clean the charging contacts with a
cotton bud and spirit.
Register the handset. Refer to
page 51.
Place the base high and free-
standing for a reliable connection.
Troubleshooting