18
Daily use
Make and answer calls
The
button on the BeoCom 6000 is used to start and end a call.
During the call, the phone displays the duration of the call and the
number or name of the person called. If you do not wish to answer
a call, you can mute the ringing signal.
Make and end calls…
Enter the telephone number
If you make a mistake, turn the wheel to move
the cursor to the digit in question and press C to
delete it. Otherwise…
Press to make the call. The call time is shown,
and if the name is stored in the Phonebook, this
is shown as well
Press to end the call, or place the handset in the
charger
Answer a call…
Press, wait for a beep and then answer the call
Press to end a call or place the handset in the
charger
Mute a handset’s ringing…
Press to mute the ringing signal. The indicator
light on the handset flashes until the caller hangs
up the phone
0
–
9
C
To get a dial tone before entering
the number, press .
You can also make a call directly
from the Phonebook. Refer to page
21 for further information.
You can also set the phone to auto
off hook, which means that you
simply lift the handset from the
charger to answer a call. Refer to
page 52–53 for further
information.
Summary of Contents for BeoCom 6000
