Bang & Olufsen BeoCom 6000 Manual Download Page 57

Page: 57 / 66

Problem

The Phonebook, Redial and Caller

ID lists are not updated.

The display shows that the

batteries are flat, even after the

batteries have been charged or

replaced.

Disarray in a system with several

handsets and bases – incorrect

messages are displayed during

registration of handsets.

The clock shows the wrong time.

The handset or the handset

indicator light does not react as

expected.

Cause

You are using a common handset

not registered to base number 1,

where the Phonebook and the

other lists are contained.

The base and all the handsets have

been switched off at the same

time.

Action

Set the handset as personal (page

34) or register the handset to base

number 1 (page 51).

Place the handset in the charger.

The battery life indicator is then

updated.

Remove the handsets from the

base (page 50) and register them

again one by one (page 51).

Set the clock. Refer to page 10.

Switch the handset off and on

again (page 12). The handset

updates your settings automatically.

Summary of Contents for BeoCom 6000



































































Search results

Summary of Contents for BeoCom 6000

Reviews:

Related manuals for BeoCom 6000

Brands by name

Popular brands

Bang & Olufsen BeoCom 6000, Manual

Search results

Summary of Contents for BeoCom 6000

Reviews:

Related manuals for BeoCom 6000

Brands by name

Popular brands