Bang & Olufsen BeoCom 6000, Manual

Page: 16 / 66

16
Placement and surroundings
The phone must not be placed in damp, dusty or polluted
surroundings and should not be exposed to direct sunlight or
liquids. Avoid the handset charging contacts touching metal or
greasy parts.
Cleaning
Clean your BeoCom 6000 with a soft, damp cloth with a few drops
of mild detergent added. Clean the charging contacts of charger
and handset carefully with a cotton bud and spirit.
Attaching the clip
With the clip you can attach the handset to your pocket. Attach the
clip on the back of the handset:
Attach the clip…
> Slide the two flaps down along the two grooves on the sides of the
handset.
> When the clip is positioned correctly, approx. 4.5 cm from the top of
the handset, it will click into place. Make sure the clip is firmly attached
on both sides of the handset.
Remove the clip:
> Pull the left flap (B) out to the left with a flat object.
> When the left flap is clear of the groove, pull the clip back – be careful
not to scratch the handset with the clip.
The following accessories are
available from your Bang & Olufsen
retailer: Extra handset, Clip, Table
charger, Wall charger.
>> Get started with BeoCom 6000
CLICK
CLICK
1
2
B