Bang & Olufsen BeoCom 6000 Manual Download Page 55

Page: 55 / 66

Display

***** FULL *****

NOT REGISTERED

12:47

07.JUN

NO SIGNAL

12:47

07.JUN

REGISTERING

****

ERROR

****

LOCKED-1:

12:47

07.JUN

CLOCK STORED

* ONLY HANDSET *

Cause

6 handsets are already registered to this

base.

The handset is not registered to any base.

The radio signal between base and

handset is lost.

Handset registration has been interrupted

prior to completion.

The keypad on handset 1 is locked.

The clock is not transferred to the base

because the handset is out of range.

Action

Remove a handset from a base (page 50)

or register the handset to another base

(page 51).

Move within signal range.

page 51.

Unlock the keypad. Refer to page 19.

Set the clock when the base is within

range. Refer to page 10.

Summary of Contents for BeoCom 6000



































































Search results

Summary of Contents for BeoCom 6000

Reviews:

Related manuals for BeoCom 6000

Brands by name

Popular brands

Bang & Olufsen BeoCom 6000, Manual

Search results

Summary of Contents for BeoCom 6000

Reviews:

Related manuals for BeoCom 6000

Brands by name

Popular brands