Technical data
Panel PC 2100 user's manual V1.17
65
2.2.6.2 Compatibility details
2.2.6.2.1 Example
The measurement values (all in mm) and information in the following figure also apply to the other figures below.
Spacing (right)
To the edge of the device
Spacing (top)
To the edge of the device
Spacing (left)
To the edge of the device
Spacing (bottom, to edge of device)
e.g. depending on the device type
Specification of difference
Outer contour of device
Cutout for PP100/200/300/400 device
PP100/200/300/400
AP900/PPC700
13 PP100/200/300/400
8.5 AP900, PPC700, PP500
Cutout for AP900/PPC700/PP500 device
4.
5
423 x 288
10
10
8.5
Installation dimensions
e.g. depending on the device type
Outer dimensions
PP500
403 x 271
402 x 266.5
Figure 31: Compatibility details - Image structure
2.2.6.2.2 5.7" devices
The cutout tolerance for PP100/200, PP300/400, PP500, AP900, PPC700 and PPC800 systems is ±0.5 mm.
The cutout tolerance for the AP1000 is +0 mm / -0.5 mm.
212 x 156
199 x 143
6.5
6.5
6.5
6.5
PP100/200/300/400
Outer contour of device
Cutout for device
PP500
AP1000
Figure 32: Mounting compatibility - 5.7" device - Horizontal1
5.7" Automation Panel 1000, Power Panel 500 devices and Power Panel 100/200/300/400 devices are 100%
mounting compatible in the Horizontal1 format.
