Technical data
62
Panel PC 2100 user's manual V1.17
2.2.5.3 USB interface
AP1000 panels with 10.4", 12.1" (4:3 format only), 15" and 19" display diagonals are equipped with a USB 2.0
interface on the front. This is equipped with a USB interface cover. IP65 protection (front) is only provided if the
USB interface cover is installed correctly.
Warning!
Peripheral USB devices can be connected to the USB interfaces. Due to the large number of USB
devices available on the market, B&R cannot guarantee their functionality. Functionality is ensured
when using the USB devices available from B&R.
Caution!
Because this interface is designed according to general PC specifications, extreme care should be
taken with regard to EMC, wiring, etc.
Front USB
The front USB interface is available to the user for service purposes.
Universal Serial Bus (front USB)
1)
Type
USB 2.0
Design
Type A
Transfer rate
Low speed (1.5 Mbit/s), full speed
(12 Mbit/s), high speed (480 Mbit/s)
Current-carrying capacity
2)
Front USB
Max. 500 mA
Cable length
USB 2.0
Max. 5 m (without hub)
1x USB type A, female
Front USB interface
Table 47: Front USB interface
1)
The interfaces, etc. available on the device or module have been numbered as such for the purpose of clear differentiation. This numbering may deviate
from the numbering used by the respective operating system, however.
2)
The USB interface is protected by a maintenance-free "USB current-limiting switch" (max. 500 mA).
