Accessories • Cables
134
Automation PC 910 User's Manual V 1.00
Cable connection
SDL flex cables with extenders must be connected between the B&R industrial PC and Automation Panel 900
display unit in the correct direction. The signal direction is indicated on the extender unit for this purpose.
• Connect the end labeled "SDL IN" with the video output of the APC910 (monitor/panel output) or Panel OUT of
an AP900 AP Link card.
• The "SDL OUT" end should be connected to the display unit (e.g. Automation Panel 900) via the Automation
Panel Link insert card (Panel IN).
B&R Industrial PC
Figure 63: Example of the signal direction for the SDL flex cable with extender
Automation Panel
Automation Panel 900 +
AP Link 5DLSDL.1000-01
to
Panel IN
to
Panel OUT
B&R Industrial PC
Figure 64: Example of signal direction display - SDL flex cable with extender
