Maintenance / Service • Fan filter replacement
Chapter 6
Maintenance / Service
Automation PC 910 User's Manual V 1.00
151
6 Fan filter replacement
1. Disconnect the power supply to the B&R Industrial PC.
2. Touch the housing or ground connection in order to discharge any electrostatic charge from your body.
3. Open the front cover.
4. To remove the fan filter from the B&R Industrial PC, push up on the locking mechanism while pulling the fan
filter outward. The number of locking mechanisms can vary depending on the system unit.
Figure 92: Removing the fan filter from the APC910
Information:
The dust filter must be inspected regularly depending on the amount of dust in the operating
environment.
