Maintenance / Service • Installation - Interface option
Chapter 6
Maintenance / Service
Automation PC 910 User's Manual V 1.00
139
2 Installation - Interface option
1. Disconnect the power supply to the B&R Industrial PC.
2. Touch the housing or ground connection in order to discharge any electrostatic charge from your body.
3. Open the front cover. The torx screws (T10) behind the cover that are marked in the image must be removed.
The number of torx screws can vary depending on the system unit.
Figure 68: Removing the combi-torx screws for the side cover
4. After the screws have been removed, the side cover can be removed by sliding it toward the front and to
the side.
Figure 69: Removing the side cover