Technical data
Automation Panel 1000 user's manual V2.00
73
Model number
5AP1120.1043-000
Interfaces
USB
Quantity
1
Type
USB 2.0
Variant
Type A
Transfer rate
Low speed (1.5 Mbit/s), full speed (12 Mbit/s) to high speed (480 Mbit/s)
Current-carrying capacity
Max. 500 mA
Operating conditions
Pollution degree per EN 61131-2
Pollution degree 2
Degree of protection per EN 60529
Front: IP65
Back: IP20 (only with installed link module or installed system unit)
Degree of protection per UL 50
Front: Type 4X indoor use only
Mechanical properties
Front
4)
Frame
Aluminum, naturally anodized
Panel overlay
Material
Polyester
Light background color
RAL 9006
Dark border color around display
RAL 7024
Gasket
3 mm fixed gasket
Dimensions
Width
323 mm
Height
260 mm
Weight
2800 g
Table 16: 5AP1120.1043-000 - Technical data
1)
Yes, but applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark.
2)
At 25°C ambient temperature. Reducing the brightness by 50% can increase the half-brightness time by approximately 50%.
3)
Touch screen drivers for approved operating systems are available for download in the Downloads section of the B&R website (www.br-automation.com).
4)
Visual deviations in color and surface quality are possible due to process or batch conditions.
4.2.1.7.4 Dimensions
323
26
0
Figure 32: 5AP1120.1043-000 - Dimensions
4.2.1.7.5 Requirements
10.4" AP1000 panels are supported starting with the following firmware versions:
•
Firmware V03.11 or later with SDL/DVI receiver 5DLSDL.1001-00
•
Firmware V04.08 or later with SDL3 receiver 5DLSD3.1001-00
