Technical data
Automation Panel 1000 user's manual V2.00
33
4.1.4 Environmental properties
4.1.4.1 Temperature specifications
Because it is possible to combine different panels and link modules, the following table provides a component-de-
pendent overview of the maximum ambient temperatures resulting from these combinations.
Information:
The maximum specified ambient temperatures for operation were determined under worst-case con-
ditions. Experience has shown that higher ambient temperatures can be achieved with typical appli-
cations in Microsoft Windows, for example. The relevant test and assessment must be carried out in-
dividually by the user on site (reading out the temperatures in BIOS or using the B&R Control Center,
for example).
Information about worst-case conditions
•
BurnInTest tool (BurnIn V4.0 Pro from PassMark Software) for simulating 100% interface utilization using
loopback adapters (serial interface, USB interfaces)
•
Maximum expansion and power consumption of the system
4.1.4.1.1 Maximum ambient temperature during operation
All temperature specifications in degrees Celsius
(°C) at 500 m above sea level,
non-condensing
Link module
The maximum ambient temperature is typically derated
1°C per 1000 meters starting at 500 m above sea level.
5DLSDL.1001-00
SDL/DVI
5DLSD3.1001-00
SDL3
1)
5DLSD4.1001-00
SDL4
Maximum ambient temperature
60
60
60
5AP1120.0573-000
✓
✓
✓
5AP1151.0573-000
✓
✓
✓
5AP1120.0702-000
✓
✓
✓
5AP1130.0702-000
✓
✓
✓
5AP1120.101E-000
55
55
55
5AP1130.101E-000
55
55
55
5AP1120.1043-000
✓
✓
✓
5AP1180.1043-000
✓
✓
✓
5AP1181.1043-000
✓
✓
✓
5AP1182.1043-000
✓
✓
✓
5AP1120.1214-000
✓
✓
✓
5AP1120.121E-000
✓
✓
✓
5AP1130.121E-000
✓
✓
✓
5AP1120.1505-000
✓
✓
✓
5AP1180.1505-000
✓
✓
✓
5AP1181.1505-000
✓
✓
✓
5AP1120.156B-000
✓
55
55
5AP1130.156C-000
55
50
55
5AP1130.185C-000
55
55
55
5AP1120.1906-000
✓
✓
✓
1)
The maximum ambient temperature for SDL3 link module 5DLSD3.1001-00 < Rev. A5 with the corresponding panel is reduced by 5°C.
